User manual

51
CLICK Pro User Manual
v. 1.0
Zoom: This tool allows you to modify the portion of image that will be displayed
in the layout, increasing or reducing its size, but without modifying its proportions.
Move: It moves the picture in the box that will later be part of the layout.
Transfer: It copies the image selected on Image Panel to the Adjustment Area.
Transfer: It copies the contents of the adjustment box to one of the boxes of the
layout or to all of them if thus specified, activating the ‘Transfer to all‘ option. To
select certain layout boxes check them with the pointer as you hold down the Ctrl key
on the keyboard.
Layouts: You can choose between 4 layouts defined beforehand in
the Settings screen.
Black & White: if this option is checked, any image sent to the
Adjustment Area or Layout Area is converted to Black&White.
Print: It will print the layout using Print tool dialogue box, where you can select
the number of copies to be printed.
4.5.2 How to compose and print a Photo ID using DIS900D Digital Camera.
1) First of all, the user must check that DIS900D camera is connected to CLICK Pro system
through USB port and set up in DPS mode (refer to DIS900D operation manual).
Besides, DIS900 mode must be checked in Settings screen of CLICK Pro, in the
PhotoID tab.
2) Click the Photo ID button on the main screen of CLICK Pro. After this, the Photo ID
screen will appear.
3) Once the picture has been taken pressing DIS900D Shot button, press DIS900D print
button.