User manual

CLICK Pro User Manual

v. 1.0

A:Adjustment Area. B:Rotation mode. C:Pre-defined layouts. D:Delete Picture.

E:Convert to Black & White. F:Back to Main. G:Preview.

H:Layout area. I:Print. J:Image Panel

8) On the right of the screen is the Image Panel (J). The images are transferred from there

towards the Adjustment Area by Transfer button. (It is also possible drag and drop it,

also to the Layout Area directly), although the format to be adjusted must be known

before doing so. To do so click the picture size format to be adjusted on the Layout Area.

This is necessary because the different formats (Photo ID, passport, wallet...) do not

have the same proportion.

9) Once an image has been transfered to the Adjustment Area, its size and position can

be modified to fit it into the compulsory area.

The adjusts area box shows a dotted line that will be used in the Photo ID format to

adjust the size of the customer’s face inside the area.

When dragging a landscaped format picture (as it comes from the digital camera) to the

adjustment area and this area has portrait format (it is higher than it is wide), the image

is automatically rotated. Nevertheless, this pre–configuration can be varied, and you can

pre–define the direction of rotation you prefer (see “Fitting Area” in the example image).

10) Once you have adjusted the fit of the image, it can be transferred to one or several

positions of the layout. If you check the label “Transfer to all” the adjusted image will be

copied to all the boxes of the Layout part.

If the image is not properly centred in the layout box, the box will be checked, the

original image will be re-transfered from the Image Panel to the Adjustment Area (you

will see how the appearance ratio changes automatically to match the new box) and will

be readjusted.

11) Once the layout has been prepared click the print–out button (I). Proceed as in the

sections on print–out of sections 4.4.1 or 4.4.2 of the manual.

Configuration: The program's main Settings screen (start screen) allows you to choose the

four layout formats that can be chosen and which one will be selected by default.