User manual

30
CLICK Pro User Manual
v. 1.0
4.3.8.3 – Sepia, Black and White, Auto Color, Sharpness
The remaining functions can be accessed in the “More...” section.
This button applies the “Sepia” effect to the picture selected. The image on
the left remains intact for the purpose of comparison.
The sepia adjustments can be changed if required. To do so check the
option “Change sepia values” to activate the control bars. These three bars will
change the balance between the red, green and blue channels to obtain the
sepia adjustment required.
If you wish to retrieve the default values, double–click each one of the three numbers of
the colour channels. For the new sepia values to take effect, the effect must first be applied
to the current image.
With this button the image edited is transformed into a ‘black and white’ image.
The image on the left remains intact for the purpose of comparison.
The Auto Colour button allows adjusting automatically the colour levels of the
image.
This tool allows you to modify the sharpness level of the image more or less,
as required. For further details on the sharpness screen see section 4.3.8.4.
4.3.8.4 – Sharpness
This allows you to modify the sharpness of the picture. Applying positive
values will sharpen the edges of the image. Applying negative values will
leave the image slightly out of focus, thereby removing small flaws.
Once you have chosen the sharpness value click the ‘Apply’ button. Whenever you
press this button the original image is used. Successive sharpness actions are not
accumulated.