System information

62
6.1.2.2 Service module
You need to select a module for production. This could be PRINTS or LABS. It would be
pointless to select BURNS (which burns DVD/CDs) for a printing service.
NOTE
It may be that not all the output options are available, depending on the selected service
and/or additional licences required.
The available output modules are those offered by the selected production machine in the
previous step.
6.1.2.3 Consumable/Output channel.
Depending on which module was selected in the previous step, different options will appear
on this screen.
For example, if you chose „PRINTS‟, you will now be required to select your preferred
consumable size. The sizes shown here are those announced by the PRINTS service module
of the production machine that was chosen in the first step.
The example shows how the „15x23HG‟ and 15x23 consumables appear at the same time. It
is important to know which of these is available in the production machines. Otherwise, if you
set an unavailable consumable, the jobs you have ordered will go into „ERROR‟ status after
being validated, instead of starting production.