System information

APPENDIX DPSLab
APPENDIX DPSLab 35
6 Practical Cases
Examples of configuration and use of the DPSLab module.
Some examples and the most important parameters to be configured for each case are
described below. The details on special connections to minilab or remote laboratory are not
explained in detail, in which the characteristics of printing sizes and specific communication
protocol parameters other than the "MITSUBISHI LAB protocol" must also be edited. When a
Click5000 machine is shipped, the default print size parameters are correct. The full details on
the configuration of DPSLab can be found in this manual.
a) Sending jobs from standalone MITSUBISHI Kiosk (PT7000 with own printers) to a minilab.
The minilab of the example needs the images in the correct size, and can only interpret JPG-
and bmp-type files.
For the Labs1 service.
 TITLE: "Chemical developing in 1 hour" (for example).
 DESCRIPTION : "Come back in 1 hour to collect your photos on chemical paper."
 OPTSIZEDISK=100000
 The "Type" in "Image Processing" should be left at "Cut", since the minilab in question
requires an exact print size.
 "COMPATIBLE EXTENSIONS". Uncheck "Only JPG", and make sure that only "JPG"
and "BMP" appear in the "Compatible Extensions" list, deleting any other extensions.
 SENDING METHOD = LAN.
b) Sending jobs from a Click5000 to a remote laboratory with FTP connection and another
laboratory a connection but with a job collection service.
For Labs1 service.
 TITLE: "Chemical developing in 2 days" (for example).
 DESCRIPTION: "Get your paper copies in 48 hours."
 OPTSIZEDISK=2500
 The "Type" in "Image Processing" should be left as "MaxSizeFactor".
 "COMPATIBLE EXTENSIONS". Check "Only JPG".
 SENDING Method = FTP.
For the second service.
 TITLE: "Chemical developing in 3 days" (for example).
 DESCRIPTION: "Get your paper copies in 3 days at the best price."
 OPTSIZEDISK=20000. 20 megas per file. It does not matter if the files are very big as
they are burnt to a CD.