System information

APPENDIX DPSLab
APPENDIX DPSLab 21
3.2.1.12 Published Information
Of all the information that is configured for each one of the services, there is a part that is
published in the core Flexilab system so that it will be available to the rest of the applications.
The following information is published:
SERVICE Section: The ID, Title, TICKET INFO and DESCRIPTION are published.
PROTOCOL Section: the following screen shows the information that may or may not be
published depending on the selection
Publish Service: it is used to configure if the entire service is published and visible to
Dispatcher system.
Formats: it is used to configure, using the check on the left, which formats, of those
configured in the formats tab, are available for selection in orders.
Customer Asks: for selecting if the use will be asked the questions configured in the
"Customer Asks" tab when an order is made for this service.
The available printing formats must be enabled to be able to process orders.
NOTE
The maximum of formats enabled in the DPSLab should be 8.
When the information to be published is changed the DPSLab must be started for the
changes to be applied.
3.3 Internationalization
DPSLab has resources to translate texts which may appear on end user screens when there
is a change of language in the final applications.