System information

APPENDIX DPSLab
APPENDIX DPSLab 20
 FTP – Enables sending to an FTP server (File Transfer Protocol) to be specified
 Self - In this case the protocol software establishes its own sending mode.
Of the four modes only LAN and FTP require additional settings:
FTP
 HOST: IP or name of the HOST of the FTP server where the orders are sent.
 PORT: The port through which the FTP service is active on the server. This is usually 21.
 HOME DIR: If it is necessary to leave the orders in a subfile in an FTP account, the route
must be specified in this field with the format „\<path to the folder>‟.
 LOGIN: User identifier for beginning a session on the FTP server.
 PASSWORD: Password to begin a session on the FTP server.
 USE PROXI: Shows whether a connection through a PROXY is to be used. The following
fields are only valid is the answer is TRUE.
 HOST, PORT, LOGIN and PASSWORD in combination with USE PROXI: Defines the
necessary settings for the configuration of a PROXY.
 TEST Button: After all the fields have been completed, this button enables access to the
configured FTP server and the feasibility of normal actions to be checked.

LAN
 PATH: Route to the folder where processed orders are deposited.
 ‘…’ button: This enables a folder selection dialogue to be opened and the folder selected
to be copied in the PATH field.
 TEST Button: After all the fields have been completed, this button enables access to the
configured Folder and the feasibility of normal actions to be checked.
