System information

1 CD Burning
CD Burning is a Service Module. It is for burning images onto a CD/DVD. This CD/DVD can
be executed on a computer to show the burned images, with no need to install any
application.
1.1 CD Burning settings
All the configurable parameters of this Service Module can be viewed by pushing this button.
 Shop name: This shop name will be shown on the application recorded on the CD/DVD.
 URL1: Internet address. This address will be shown on the application recorded on the
CD/DVD.
 URL2: Internet address. This address will be shown on the application recorded on the
CD/DVD. This second address is only available for SUBLIME (see SUBLIME).
 Proprietary images: proprietary image format. When this option is activated the images
recorded on a CD/DVD can only be viewed on DPS systems.
 Do not replace files: when this option is activated, all the files saved in the destination
file beforehand will be protected. If an attempt is made to save an existing file, the one
already saved has priority, while if this option is not activated the new file will overwrite
the previously saved file.
 Verify mode: saves onto the CD/DVD with verification. While saving, it checks to see that
it is being done correctly. This increases the CD/DVD saving time.
 Buffer underrun: Saving takes place with mistake proofing. Leaving this option activated
is advisable.
 Default compilation type: defines what type of application will burn onto the CD/DVD.
o SUBLIMECD: an application allowing saved images to be viewed and printed on a
Mitsubishi printer, the images to be edited and the images to be uploaded to
Mitsubishi Album.