System information

23
The default password in new units is 123 for the supervisor and blank for the operators.
It is recommended that you change the operator password to prevent the end customer from
accidentally accessing the service screen, and you should also change the supervisor
password to increase security and prevent different users from changing the system's
configuration, such as the list of active products, their prices, etc.
Depending on the identified user, access to the system configuration will also appear
available on the service screen, a function that is reserved for the exclusive use of supervisor
users.
The service screen gives access to the following functions:
Settings (only the supervisor user)
DispatcherControl module for order production and production devices
MonitorModule designed to start applications and other technical functions
Statistics. Remote support. If your installation allows it, using this option will give
technical support access to your machine; consult your dealer for more information.
Operator mode. This option sets the kiosk to operator mode (see the section on
Operator services for more information)
Visualisation of the system parameters: software version, current user, SYSTEM_ID,
and Kiosk 'Alias'
Shut-down button
NOTE
To switch off the system, always access this screen and press the shut-down button.
Otherwise, you could damage the equipment‟s performance or even its operating system.
Settings for
supervisor only.