System information

APPENDIX DPS PrintServer
APPENDIX PrintServer
1.1.27 Working as a single printer
This working mode is only referred to the orders that are generated locally and printed with
the MPU Sorter.
To generate and order for the MPU Sorter, choose the option labelled as “Sorter” in the field
“Destination” of the Print page in CLICK.
Choose the available paper size and quality in MPU Sorter. Then choose the destination
MPU. In case of having more the one, both will be listed. Otherwise, the MPU Sorter unit will
be the default destination.
The MPU will only print orders sent with the option “Sorter” or, in case of having a printer
inside the MPU Sorter with a specific format, it will also print orders with the options “Multi
printers” or “Single printer”.
1.1.28 Working as a central high production unit
To be able to print with the MPU Sorter using an Order Terminal it is necessary to fulfil the
requirement that at least one printer contained in the MPU Sorter has to be the only printer in
the system with the desired format.
In the case where the MPU doesn‟t own exclusively a format, it‟s necessary to export the
order to CLICK so as to resend it to the MPU Sorter.
Please refer to the chapter 4.3.5 form the Click application manual to know how to export an
order.
1.1.29 Compatible formats
The MPU unit is compatible with most of the formats
supported by the 98xx series printers except those
ones called composition, or multi-cut, formats. Please
refer to the formats table from chapter 1.2.3 for
further information about available formats.
NOTE
Composition or multi-cut formats are no available
printing with a MPU Sorter.
Configuration
The configuration of the MPU Sorter is placed in
general settings of PrintServer (see chapter 3). The