System information

APPENDIX DPS PrintServer
APPENDIX PrintServer
PRINTER MODEL
CALIBRATION
PROFILING
CP95XX Series


CP9600 Series


CP98XX Series


CP3020 Series
X

CP3800 Series
X
(*)
MPU


Plotter Series
X
(*)
CP70 / CP707 Series


(*) For these printers, profiling process requires proper windows driver configuration.
For printers not compatible with calibration, only ICC profiling will be enabled on the iQ wizard
application.
Summary
There are 3 different scenarios you can apply:
1) Using provided generic calibration files and generic ICC profiles.
The system is configured by default with this scenario when iQ mode is activated. If you
do not perform any additional adjustment you will obtain a very good printing quality.
2) Calibrating the printer (visual procedure or hardware attended procedure) and
using the provided generic ICC profiles.
This option will provide you better than default results. Calibrating the printers will result in
better colour consistency. It is a quick process, so you will not spend a lot of time, and
you will improve a lot your printing quality.
3) Calibrating the printer and creating new ICC profiles.
This is the option that will give you the best results, but requires more time for adjusting a
printer.
MITSUBISHI RECOMMENDS:
Acquiring an Eye-One device and performing a full calibration the first time (printer profiling
optionally) and, periodically, re-adjust the printers with a quick calibration.
Please, read carefully chapter 5.3 to obtain detailed information and read the table below as
well.
1.1.25 Printing quality level optimisation table