System information

APPENDIX DPS PrintServer
APPENDIX PrintServer
Print Profiler application will
appear, with all options freely
configurable. First of all, select
the printer type.
In case of CP3800 select RGB
Dye sub (for Plotter series you
should select RGB Printer). Click
the blue links on the application
in order to obtain more
information.
Then click the green right arrow
to continue to next step „Select
Device‟.
Click „Connect‟ button to
establish the communication between the Eye-One device and the software and then click
„Calibrate‟ to calibrate the device. Follow the on-screen instructions and click „Ok‟. (See
chapter 5.3.3 for detailed information).
Click the green right arrow again. „Define Target‟ step will appear.
Here we will be able to configure and print the patches for printer profiling.
Click „Page Setup…‟ to configure the printing output (1)
Then click on „Printer…‟ (2) and select MITSUBISHI CP3800DW printer from the list (3). Click
„Ok‟ button. „Page Setup‟ menu will now have information about the available printing sizes of
the printer.
1
2
3