System information

APPENDIX DPS PrintServer
APPENDIX PrintServer
1.1.22 Printer Profiling
You can access this screen from the „ICC Profiling‟ shortcut button on the iQ screen or after
calibrating a printer. It is highly recommended to perform a full printer calibration prior to
profiling. Printer profiling should only be used for fine tuning and it is not intended for daily
adjustment.
If you don‟t want to generate a new ICC profile, simply click „Skip‟ button and the wizard will
finish. Now we will explain how to generate a new ICC profile.
Firstly, click on Print Patches‟ button. Several patches for your selected printer and paper
size will be printed. Wait until finished and then, click „Printer Profiling‟ button to start the
process. Print Profiler software will appear.
CALIBRATOR & PRINT PROFILER ACTIVATION CODE
When Print Profiler is launched for the first time, if Calibrator has not been started before,
you will be prompted to insert an activation code. This code can be found inside the Eye-One
case in a paper labelled “Calibrator Unlock Code”. Please, note that the unlock code is case
sensitive.
First of all, click „Connect‟ button to
establish the communication between
the Eye-One device and the software.
Secondly click „Calibrate‟ to calibrate
the device. Follow the on-screen
instructions and click „Ok‟.
After calibration, click the green right
arrow on the bottom right
of the screen to continue.
1
2