System information

APPENDIX DPS PrintServer
APPENDIX PrintServer
NOTE
Sometimes, depending on the printer model, it can appear the message below. Don‟t care as
it is just an informative message.
The error may be caused by the fact that the printer is not warmed enough. But this doesn‟t
prevent performing a good calibration.
Once you have finished reading all the rows of the different pages click „Next‟ button to
continue. This is the last screen, where you have to press the button „Generate Tables‟ (1) in
order to generate the calibration information. You will be able to see a graphics chart where
the read information will be shown.
Finally press „Complete‟ button (2) to exit the Calibrator application.
Now you have generated a calibration for your selected printer, paper and quality. Most users
will find this calibration good enough, because can be used with the provided generic ICC
profiles. The next screen will ask if you want to use the generic ICC profiles or if you want to
improve even more the quality by generating a new profile for the selected printer, paper and
quality settings.
1
2