System information

APPENDIX DPS PrintServer
APPENDIX PrintServer
For further information follow on-screen instructions.
You can repeat the process up to four times to fine-tune the result by clicking “Continue” or, if
you are satisfied with the result, you can press “Finish” at any time you want.
Then the final screen will appear. Click „Finish‟ again to leave the iQ wizard. You will return to
the previous configuration screen.
The generated calibration will be applied automatically to the selected printer, paper and
quality. You only have to press „Close‟ to leave the iQ configuration screen or select another
printing quality and start the process again.
1.1.21.2 Calibration with Eye-One device
With the Eye-One calibration device you will be able to obtain the best printing quality
possible, even if you think that the default quality is good enough.
Start the calibration wizard and when you are asked whether you have or not and Eye-one
device choose the option “Yes, I have an Eye-one device. After that, you will have to choose if
you want to perform a full or a quick calibration.