System information

APPENDIX DPS PrintServer
APPENDIX PrintServer
How to adjust the printer: iQ management wizard
iQ management wizard is the application that will guide you in the printer adjustment process.
If you are not satisfied with your printing quality / consistence, please follow the iQ
management steps in order to adjust your printers. If you are satisfied with your printing
quality and you have an Eye-One device you will be able to get even better quality. If you
don‟t have an Eye-One device, use the wizard only if printing quality is not good, because the
visual adjustment process is not so accurate.
Access the initial screen by pressing the „Explore‟ button or by selecting Menu > Settings >
Printers.
Then select „Image quality management‟ and click „Setup…‟ button.
Printer calibration will be performed with the installed media. To start the adjustment process,
follow the steps on the right side of the screen.
Firstly, choose the printing quality, and secondly, press “Start wizard” button. It is very
important to check that any of the printers installed is printing before continue. A message box
will appear warning about it. Click “Ok” to continue.