System information

APPENDIX DPS PrintServer
APPENDIX PrintServer
CP9500DWS/CP3020DW using CPD files
1. Check that the Colour Correction group has „Advanced‟ option checked.
2. Press the „Set-up‟ button.
3. Load or „draw‟ the CPD curve that you need.
4. Save the new curve if needed and press the „Exit‟ button.
5. Press the „Parameters‟ button on the „Detected Printer list‟ to show the Parameters
form.
a. In the „Colour Table‟ group, in the „Colour‟ drop-down list box, select the
„Printer Colour‟ option. Do not use the „Flat‟ colour table. These convention of
these names depends on the printer model.
b. In the „B/W‟ drop-down list box, always leave the „Printer Colour‟ option
selected.
c. Set „Sharpness‟ to „User‟ and „Manual‟ to 6.
d. Set „Gamma Colour‟ to „Photo‟.
e. Set „Mode‟ to „normal‟.