System information

20
2.11 Register
If you decide to connect the unit to the MITSUBISHI ELECTRIC servers, it is recommended
that you select the ON-LINE option.
If you also wish to centralise the production details for the different units in different locations,
or register the units for new licences, etc., the simplest way is to also register the unit.
Registration can be done manually or automatically: for manual registration, a registration key
is required that is facilitated by the staff installer or product supplier .This key connects the
current unit with a group of units that have previously been registered in the servers.
The automatic key registers the unit in a common group that is not related to any corporation
or chain.
2.12 Configuration and Finishing
Throughout the configuration wizard process, certain information has been introduced that is
necessary for the system to work correctly, whichever the selected Kioskgifts mode of
operation.
It's possible to now start working with the unit, but it is also necessary to make a selection of
all the products that have been created automatically, and, for example, set the prices for
those products.
To do so, you must press the Configuration button and check anything that may need to be
changed. The content of these screens is explained in detail over the following chapters.