System information

APPENDIX DPS PrintServer
APPENDIX PrintServer
General settings
These parameters control the behaviour of the PrintServer.
There are some of them that are general for every printer and others applied only to the MPU
Sorter.
Please refer to chapter 6 for further information about MPU Sorter unit.
Adjust
Access this screen by selecting Menu > Settings >
Adjust
1.1.9 Balanced
This is the default configuration used if no
„Balanced‟ mode is specified in the requests sent.
If checked, the jobs in a request are sent to
printers that can print the selected format.
Otherwise, all jobs will be sent to one of the
printers that supports the format.
1.1.10 Balanced Type (Speed Mode)
DPS Print Server sends any order to the first
printer available. This increases the printing
speed, but the printing order is lost.
1.1.11 Balanced Type (Order Mode)
A set of ordered printing jobs are assigned to each
available printer. Instant prints are ordered, but speed is lost (because an available printer
could not be assigned in order to prevent the order being lost).
1.1.12 Sorting
Whenever the print queue is ready to print, this option will reverse (Descending) or not
(Ascending) the printing order. This option is useful for copies to land on the print tray in
reverse order.
1.1.13 Beep on finished request
If checked, a sound will be played when a request finishes printing.
1.1.14 Logging / No resize
These parameters are for technical purposes. Please leave them unchecked.