System information

APPENDIX DPS PrintServer
APPENDIX PrintServer
Printer Settings
Printers are factory-adjusted. However, some working parameters can be adjusted.
Access this screen by pressing the Explore button or by selecting Menu > Settings > Printers.
If you select a printer and then click on “Parameters” you will be able to change some
advanced printer options which can be used to fine tune adjustments or improve print quality.
 Alias. Change this to improve printer
identification.
 Sharpness. Detail improvement.
Recommended values:
CP9500DW-S: User – Manual - 6
CP9550DW-S: Noise:Off Sharpness:4
CP9600DW-S: Noise: Off Sharpness:4
CP9800DW-S: Noise:Off Sharpness:8
CP9820DW-S: Noise:Off Sharpness:8
CP70/CP707: Noise: Off Sharpness:4
CP3800D: Not available
CP3020D: Not available
 Image Quality. The default print mode of
the printer which is being configured. This
quality level is used when no image quality
is specified by the sender application.
Improved quality involves a higher quality
of image and colour, but also a slower
printing speed.
 Gamma Colour. Colour depth adjustment.
Leave the default values if you are using ICC profiles.
 Colour Tables. The recommended configuration is None-Flat and it is the correct option to
use with ICC profiles (default).