System information

APPENDIX DPS PrintServer
APPENDIX PrintServer
On the left side are placed all the controls which allow configuring the different adjustments
assigned to the printer. On the right side is placed the button to start a new iQ adjustment
process. It is highly recommended not to change the configuration of the left side panel. The
values are configured automatically when you perform a calibration or profiling process with
your printer, and they are only intended for administration or advanced testing purposes.
To start the iQ adjustment process, please, follow the steps on the right side: Firstly, select
the quality you want to adjust, and then press the „Start wizard‟ button.
A new screen will appear and will guide you trough the process. To obtain fully detailed
information about the iQ management system, please, refer to chapter 5.