System information

APPENDIX DPS PrintServer
APPENDIX PrintServer
 ICC Profiles list. With the list on the left, it‟s possible to manage the ICC profiles placed in
the DPSPrintServer\ICCs folder. It‟s possible to add new profiles to the list by pressing
„Load ICCs‟ and selecting an ICC profile placed in another location. It‟s also possible to
delete them from the list by pressing „Delete ICCs‟.
 Media Type. Each media type can be configured with a different ICC profile. Be sure to
configure at least the currently used media type.
 Quality. Each print quality has a different colour contrast and intensity. Different ICC
profiles must therefore be used.
 Colour – B/W. Colour correction for colour or black & white images can be enabled and
configured separately. Enabling Colour and disabling B/W is recommended. An ICC profile
is assigned to the Colour mode of every media type and every quality by default.
 Arrow button. Use this button to assign the selected profile from the ICC profiles list to
Colour or B/W.
Please, refer to chapter 4 for more information about classic colour correction settings.
NOTE
All default ICC profiles will be applied in any new detected printer.
References:
Part of DPS PrintServer (Mitsubishi Electric Europe, B.V.) uses “Colour Science i2e Image Enhancement
Technology”.
1.1.8 Image Quality Management (iQ)
Image Quality Management is a new concept of printer calibration and
adjustment which makes possible to obtain the maximum quality in your
prints.
Access this screen by pressing the „Explore‟ button or by selecting Menu
> Settings > Printers.
Then select „Image quality management‟ and click „Setup…‟ button to
access iQ configuration screen.