System information

APPENDIX DPS PrintServer
APPENDIX PrintServer
 Basic
Select Basic and click „Colour Setup‟. The colour components can be fine-tuned
separately (R,G,B) or together (Brightness)
„Level‟ adjusts the colour saturation
„Gamma‟ adjusts the middle tones
Each printer can be adjusted individually and can be optimised for colour or for black &
white pictures. It‟s also possible to define two more custom optimizations: Custom1 /
Custom2. Different profiles can also be saved / loaded.
NOTE
B&W, Custom1 and Custom2 optimisations are not applicable to DPSKiosk
 Advanced
Select Advanced and click „Colour Setup‟.
Colour components can be fine-tuned
separately (R,G,B) or together (RGB)
Separate adjustments can be made at
every point on the curve from shadows to
highlights.
Adjustments can be made for each printer
and each format individually, and they can
be optimised for colour or for black & white
pictures and optimize more options with the
values Custom1 / Custom2. Different
profiles can also be saved / loaded.
 ICC Settings (Colour Matching, ICC Profiles)
For best colour quality improvement, use Colour
Matching.
Check „Apply Colour Matching‟ option in „Colour
Matching‟ panel. If you want to use picture files
embedded profiles, please also check „Use pictures
embedded profile‟.
NOTE
Old Mitsubishi ICC profiles from DPS PrintServer versions prior to 5.6 are no longer
supported. Use the new ones provided or contact Support if you had old specific ICC profiles.
From version 5.6. DPS PrintServer allows using standard ICC profiles as well as the new
Mitsubishi ICC Profiles provided.
Select the printer you want to configure. Press the „ICC Settings…‟ button in the „Printer
Settings‟ panel. This setting only affects the printer selected.