System information
APPENDIX DPS PrintServer
APPENDIX PrintServer
1.1.6 Matte overcoat option
In the next text box, it is possible to view the relation between different printer models and
Matte overcoat.
PRINTER MODEL
MATTE
CP95XX Series
X
CP9600 Series
X
CP98XX Series
CP3020 Series
X
CP3800 Series
X
MPU
X
Plotter Series
X
CP70 / CP707 Series
(*)NOTE
This option is compatible only with printers model MITSUBISHI CP9820DW Series, and
format print HG and Superfine quality selected.
Printer Configuration
There are different adjustable parameters available on the Search Printers Screen. Printers
are factory-adjusted by default and the system is already configured to obtain a good printing
quality. However, in order to achieve the best quality possible it is necessary to adjust some
parameters and perform some periodical calibrations.
Colour Configuration
There are two configuration modes which can be applied on each
printer individually: Classic colour correction and Image quality
management. Classic mode allows you to configure standard
printer parameters through legacy adjustment screens. The
available adjustments with classic colour correction are fine, but it
is highly recommended to use the new Image quality
management system, since it represents a forward step in colour
managing and printing consistency comparing to the classic
mode.
1.1.7 Classic colour correction
Access this screen by pressing the „Explore‟ button or by selecting Menu > Settings > Printers