System information

APPENDIX DPS PrintServer
APPENDIX PrintServer
L51 - 15X5.1(x2) - 6X2(x2)

X


X
X
X
X
L51HG - 15X5.1(x2)HG - 6X2(x2)HG
X
X


X
X
X
X
W55 - 15X5.5(x4) - 6X2.2(x4)

X


X
X
X
X
W55HG - 15X5.5(x4)HG - 6X2.2(x4)HG
X
X


X
X
X
X
A5 - 15X20 - 6X8
X
X
X
X
X
X

W10A5 - 10X15(x2)_A5 - 4X6(x2)_A5
X
X
X
X
X
X

W13A5 - 13X18W_A5 - 5X7W_A5
X
X
X
X
X
X

1
When the printer is an MPU multi-cut formats are not supported.
1.1.5 Published print sizes
It‟s possible to enable or disable the print sizes supported by the software. This means that the software only will print
using the resulting list. This chart is available at Menu/Settings/Published Printsizes
The operator can always come back to change any of these parameters.
This helps to minimize the lists that are shown in different places of our applications and also the different related
products, saving time and efforts to configure all of them.
By default, all the formats are enabled. It‟s highly recommended to disable entirely some groups if the system is not
going to use them, like HG media, Standard media, CP3020, Plotter, and so on.
IMPORTANT
For enabling the CP9600 exclusive formats, the option “exclusive formats” in the CP9600
printer parameters section of DPSPrintserver must be checked.
NOTE
By default, the Plotter and CP9600 exclusive formats are disabled.