System information

APPENDIX DPS Monitor
APPENDIX DPS Monitor 4
 The applications installed and their current version is identified in the application and
version columns.
 The running column shows if the application is running.
 The status and error code columns show the status of the devices (which may be ready,
warning, critical warning, error, initializing) and a code which identifies the type of error in
the device and what is necessary for the technical service to be able to solve the problem.
 Error Msg provides a brief explanation of the type of error.
From the main menu, it is possible to:
o Run or close the applications manually.
o Restart or shutdown the system.
o Registration and activation the software..
o Selection application to execute in the system.
o Enable/Disable the hardware detection to be connected the machine.
o Enable/Disable the USB device writing protection.
o This option allow the writing to the internal or external USB device.
For enable this option must be select the Menu Configuration, USB Protection
section and select Enable.
For disable this option must be select the Menu Configuration, USB Protection
section and select Disable.
The default option is “Enable” for DPSKiosk software. This means that every time the
machine gets power on the USB write protection will be enabled.
For DPSClick and ClickLite software, the default option is “Disable”.