System information

APPENDIX Dispatcher
APPENDIX Dispatcher 19
2.5.1.2 Working with services and their actions
Changes can be made to the services using the toolbar buttons. The status of each service is
shown in the same way as on other screens (a coloured icon).
2.5.1.2.1 PLACING A SERVICE MODULE IN PAUSE MODE
It is possible to place a complete Service Module in pause mode by selecting and pressing
the “PAUSE” button. This makes the Service Module stop all the jobs it is processing until it is
released again. It will then continue working at the point where it left off.
Some Service Modules, such as CD burning, cannot be stopped when the process has
started, as the output device could be damaged. In this case, a message appears stating that
the action is impossible.
2.5.1.2.2 PAUSE MODE, RESUME, STOP AND EDIT A SERVICE
This screen enables the common actions on the toolbar to be executed on the selected
service.
2.5.1.3 Completed services - "DONE”
Completed services appear on this screen, until the execution of a new service in the same
device starts, or until the device is released, if it is in pause mode after processing. This is
useful for identifying the output device for a specific service.