System information

APPENDIX Dispatcher
APPENDIX Dispatcher 13
 Copies: The number of images for processing is shown in the first section. When burning
CDs, the number of CDs is normally 1.
 Service: Shows the print format (10 x 15) or the type of service for IndexPrint, calendars,
card photos, etc.
 Status: Shows a progress bar and the completed / total number of copies.
 Destination: Shows the output device/s for the service if it is already being processed. If
these services have not yet been assigned to a device, an “Output device not yet
assigned” message appears.
There is only one case in which the destination is known before assignment of the
Service Module - when a destination device isn determined from the source application.
(E.g. ClickPRO)
This information is useful for collecting jobs after they have been processed, when there
are more than one output device.
For example, a PRINTING service in balanced mode can be printed on all the connected
printers which offer this format. This section shows the “alias” of all the printers which
process this type of service.
 First and last images: Shows a thumbnail of the first and last image in the service.
2.3.5 Order/service options
Order and service options can be edited and viewed using the options button on the
toolbar.
This window activates a pop-up window showing the options for the selected element
(order or service) and enables some settings to be modified.
The options for orders and services are not translated as they are internal Dispatcher values.
The meaning of each is listed below.
2.3.5.1 Restrictions
It is not possible to edit options in orders or services if their status is Executing or Pending.
Changes cannot be made in these cases.