System information

13
2.1 Language selection for set-up and input peripherals
In the first configuration wizard screen, you are asked to select the language you wish to use
during the set-up process. This selection does not set the language in which the machine will
later work; it is simply for the operator‟s convenience during the set-up process.
The operator will also be asked if he or she has a physical keyboard or just a touch screen, in
which case a virtual keyboard will appear on screen to enable text writing where necessary.
2.2 Connectivity – I: network settings
In the second step, you are asked to type in the terminal number (values from 1 to N).
This value, which numerically identifies each Kiosk installed in the store, is also used for:
Automatically changing the fourth figure of the IP address for machines that are connected
through a network. The default IP address that comes with the machines is 192.168.0.200.
The IP can only be changed by pressing 'Apply'.
Automatically changing the machine‟s Bluetooth ID to avoid conflict with other machines in
the same store.
Automatically changing the initial order number, again to avoid conflicts when orders from
different machines are sent to the same central production system. So, if the Kiosk is
numbered 1, 2, 3, etc., the initial order that the production system receives will be 10000,
20000, or 30000, and so on.
This is why it is important not to repeat this number for different Kiosks within the same store,
even when they are not interconnected.
If the store‟s current IP installation requires more parameters to be configured, such as the
netmask or the gateway, press the button indicated for changing more network parameters.