System information

validation ticket is printed out from the printer installed at the payment counter, with an

exclusive ID for that order (in numerical format and in barcode).

3) The customer goes to the counter to pay for his or her order. Once payment has been

made, the customer will be given the ticket with the order ID. The customer will be told to go

to the stand-alone terminal and choose the 'Pending Orders' service.

4) The customer chooses „Pending Orders‟ on the production machine, and when he or she

comes to the order validation stage, they can either use the barcode scanner or type in the

numerical code manually.

5) The order will automatically start processing.

2 First boot: configuration wizard

When the machine is switched on for the first time, the configuration wizard will start. It is

important to carefully follow all the steps in order to configure all the parameters in the

shortest possible period of time.

If the configuration process is irregularly interrupted, the wizard will appear again the next

time the machine is switched on.

If you want to start working with the Kioskgifts unit in stand-alone mode, i.e. working with the

printers that may be connected to that machine and with a very basic configuration, all you

have to do is abort the process by pressing 'Back' on the first wizard screen. In this case, if

you want to configure the system parameters in detail, you can do so by using the

administration screens that will be explained in the following chapters.

NOTE

It is recommend to read the first sections of the manual to understand the installation and

interconnection possibilities of different units, as well as other basic concepts that appear

during installation.

Before configuring the machine for the first time, you should also follow the assembly and

connection instructions: connecting the different printers and loading consumable material,

connecting other peripherals, IP network cables where necessary, and switching on the

Kioskgifts itself.

In the following sections, you will see a step-by-step explanation of how the configuration

wizard works.