Specifications

Kiosk Appendix A. Photo Web Album. Operator Manual
March 2006 - v2.2
This parameter activates the compression of the pictures (JPG). It should be set to ‘1’ to
permit the compression of the JPG.
7) COMPATIBLE
You can ignore this parameter. In any case, if the remote laboratory wants to receive another
type of picture formats (for example TIF), the IMGCOMP parameter should be set to ‘0’ and
COMPATIBLE as follows: COMPATIBLE=jpg#tif
7.3.5.2 Section [CUSTOMER_ASK]
1
) [CUSTOMER_ASK_X]
It helps to obtain all the necessary information from the customer for the remote laboratory.
The content of VARNAME and DESCRIPTION may be changed for the MITSUBISHI LAB
protocol. VARNAME is the internal reference for the specific question, it can be configured as
necessary, provided that it is a short word. DESCRIPTION is the question the customer will
see on screen. Check the example below.
[CUSTOMER_ASK_1]
VARNAME=ADDRESS
TYPE=STRING
DESCRIPTION=Enter your address
DEFAULT_VALUE=
ACTIVE=TRUE
7.3.5.3 [Formats] section
1) FORMAT_X
Each format must be configured one by one, depending on the remote laboratory's
requirements.
The ALIAS parameter will be displayed on screen in the application (Kiosk or Click) when the
user chooses the format. DESCRIPTION is also displayed on some of the systems to give
the customer more detailed information on this product.
PRODUCT_ID is the reference code that the laboratory recognises, and
PRODUCT_DESCRIPTION is also used for possible laboratory needs.
MEGAPIXELS is the minimum amount of information the laboratory needs to print with a
certain quality. This information on our system to warn the user about the quality of their
pictures with regard to the format to be printed. If the laboratory does not offer this
information, it may be configured by calculating (WIDTH * HEIGHT) divided by 2.
WIDTH is the real width of the picture in pixels that the laboratory needs for this print format.
HEIGHT is the real height of the picture in pixels that the laboratory needs for this print
format.