Specifications

Kiosk Appendix A. Photo Web Album. Operator Manual
March 2006 - v2.2
The Settings screen configures the 1h and 24h services. Both have the following configuration
options:
• Protocol
The desired protocol must be selected in the pull-down menu. Only installed protocols can be
selected here. Please contact your dealer for more information about different communication
protocols. Mitsubishi generic protocol is already installed on each system.
Specific or common parameters for that protocol can be set in the configuration file by
pressing the CONFIGURE PROTOCOL button.
• Delete finished jobs on start-up
If this box is checked, requests with status ‘Done' are erased automatically when the system
starts up. In this way you can see how many requests have been done before restarting the
system.
• Schedule
When this option is checked two options will appear to set the start and end times for sending
the pictures via LAN or FTP.
• Method
You can select the following methods of delivery.
o FTP
: this will be selected normally to send requests to a remote laboratory. It allows you
to enter all the necessary parameters for FTP configuration: host (IP), port (default 21),
address (default blank), login and password. The TEST button checks connectivity once
the parameters have been correctly set.
o LAN: sets the destination path for LAN connection. This button can be used to access the
Windows explorer to make it easier to set the path.
o Delivery: this method is based on exporting the requests to a storage device.