Specifications

Kiosk DPS PrintServer Operator Manual
March 2006 - v2.2
6.4 Configuring printer parameters
Printers are factory-adjusted; however some working parameters can be adjusted.
Access this screen by pressing the Explore button or by selecting Menu > Settings > Printers
If you select a printer and then click on “parameters” you will be able to change some advanced
printer options which can be used to adjust or improve print quality.
• Sharpness. Detail improvement. Recommended
values:
o CP9500DW-S: User – Manual - 6
o CP9550DW-S: Noise:3 Sharpness:5
• Image Quality. Superfine Mode Off (Only CP95)
• Gamma mode. Colour depth adjustment. The
recommended value is Photo.
• Colour Tables. Recommended values:
o CP9500DW-S: Normal
o CP9550DW-S: Table 0
• Number of copies near end will generate an
Incident when reaching the configured number.
• Save and Exit to apply changes.
The default values are usually the best, but operator can vary these parameters to improve
printer performance on a printer-by-printer basis.
NOTE
Do not change the Colour Table unless ICC profiling applies.
In such a case Flat or No tables will be automatically selected
Restrictions:
• With the format 10x15x2 based on paper-cut, they cannot implement white edge.
7. DPS Minilab
DPS Minilab is the application that processes the print requests being sent from the main DPS
Photo application to an external printing system. Depending on the installed lab module (DLL
format), it adapts the file size and format, creates the compatible folders and files structure, and
sends the information if needed.
After a request is made, DPSMinilab sends it via LAN or FTP or exports it to a storage device.
These processes are monitored on the Main Screen of the DPS Minilab application.