Specifications

Kiosk Customer Interface Operator Manual

March 2006 - v2.2

• Instant prints

Select this option to print out the pictures using the Kiosk

printers.

The customer can then choose the print size unless there is only one,

in which case it will be selected automatically. If any print size has

already been used by the customer in the same request it will appear

greyed with the word “done” on it.

Available formats will depend on DPSPhoto application General

Settings and Printer availability.

Information on the number of remaining prints is also shown.

• CD Burn

Select this option to burn a CD or DVD with the files and pictures chosen.

On choosing this service you will be prompted to insert an empty disk before

proceeding. The maximum capacity of the CD is calculated once inserted. The actual

available space will be less than the disc's since the CD includes a viewing program and the

miniatures of the pictures selected (approximately 175 MB on a full CD). The amount of disc

occupied will be displayed as the pictures are selected.

• 1h Prints

Select this option to send the pictures to an alternative Digital Photo Processor

Usually there will be a Minilab in the shop and the request will be collected at the

counter in the time defined by the shop policy.

Available formats will depend on the DPS Minilab module settings (see Section 7 and

Appendix C)

• 24h Prints

Select this option to send the pictures to an alternative Digital Photo Processor

Usually there will be a Laboratory or Minilab in the shop and the request will be

collected at the counter or even be sent to the customer's home at the time defined by

the shop.

Available formats will depend on DPS Minilab module settings (see Section 7 and Appendix

• Print Terminal

Select this option to send the pictures to a ClickPRO. The operator will take care of the

printing of these jobs. This service will be visible on configuring a 1h or 24h print

service targeting a ClickPRO unit.

Available formats will depend on DPS Minilab module settings (see Section 7 and Appendix