Specifications

MITSUBISHI Digital Color Printer CP-D80DW series
8
13) When the 5x15x2 (2x6”) (Type1 or Type2) is selected for the paper size
The paper cut position may shift depending on the printer.
14) When you pause or resume the printing or delete the job in the Print Queue while the printer driver is
communicating with the printer such as during the printer error, the communication may fail and the de-
leted job may be printed.
15) When the 10x15 or 5x15x2 Type2 is selected for the paper size
When the number of printed pictures (pages) or that of copies is set to an odd number, a blank page may
be printed in case of 5x15x2 Type2 and the last 1 page may be printed in case of 10x15, if you delete or
pause the job in the Print Queue during the printer error.
16) When the size mismatch error occurs in Mac OS X 10.7, 10.8, or 10.9 (See 3. Error indication No.15) and
the failed job is deleted in the Print Queue without resolving the error, the printing may not be started
even when the next print job is sent.
In this case, connect the USB cable again. The error indication is canceld in the Print Queue.
If you keep the USB cable connected, printing is started after a while.
17) Error indication in Mac OS X 10.8 or 10.9
In Mac OS X 10.8 or 10.9 the screen displaying the error and the printing state are different from the
conventional OS due to the specifications change of the OS.
In addition, when the original error dialog message is long, middle of the sentence is expressed as “…”,
and the whole sentence may not be displayed.
In such cases, please refer to followings for the screen display and the whole sentence.
(No. is the No. that is shown in Table of 3. Error indication)
No.
Error dialog message
Whole sentence Screen display (10.8) Screen display (10.9)
2
The printer does not respond.
Turn the printer Off and then
On again, and try again.
The printer does not respond.
T…and then On again, and try
again.
Same as Mac OS X 10.8
3
*1
Something is wrong with the
printer.
Turn the printer Off and then
On again, and try again.
Something is wrong with the
pri…and then On again, and
try again.
Something is wrong with the
pri…nd then On again, and try
again.
5
Mechanical Error. Turn the
printer Off and then On again,
and try again.
Mechanical Error. Turn the
print…and then On again, and
try again.
Same as Mac OS X 10.8
*1: When No. 3 screen display clicks the [i] mark of the screen top, the whole sentence is displayed.