Specifications

MITSUBISHI Digital Color Printer CP-D80DW series
5
2. Print dialog
The following settings can be configured when “Feature Sets” of “Printer Features” is set to “Options” in
the Print dialog.
<Fig.13 Print dialog>
1) Sharpness
none / -3 / -2 / -1 / 0 / 1 / 2 / 3
Level of outline correction is changed.
none :Not perform the outline correction.
-3 to 3 :The value is smaller, the outline becomes softer.
The value is larger, the outline becomes sharper.
2) PrintFinish
Printing is fi nished in matte.
Note: Matte is only recommended for an even number of 10x15 prints.
* Printing an uneven number of prints may lead to lower number of prints produced per ink
ribbon kit.
3) PrintSpeed
Printing speed is set.
Fine : Printing is performed at the standard speed. (Standard quality picture)
SuperFine : Printing is performed at the speed slower than the standard speed. (High quality picture)
UltraFine : Printing is performed at the speed slower than the SuperFine speed. (Ultra high quality picture)
* When matte is selected, the Fine speed cannot be set.
Note: Fine is only recommended for an even number of 10x15 prints.
* Printing an uneven number of prints may lead to lower number of prints produced per ink
ribbon kit.
4) Color conversion
none / Table1
none :Color conversion is not performed.
Table1 :Color conversion is performed.
When “Feature Sets” of “Printer Features” is set to “Gamma”, “Brightness”, or “Contrast”, the menu
display changes and the following settings become configurable.
5) Gamma
Adjusted value R, G, and B (-5 - +5)
Use this function to adjust the density of the middle tones.
When you want to increase the density of the middle tones, decrease the value of “Gamma”.
255
White
(Output data)
0
Black
255(Input data)
White
Larger
Smaller
Gamma
6) Brightness
Adjusted value R, G, and B (-64-+64)