Specifications

MITSUBISHI Digital Color Printer CP-D80DW series
4
Uninstallation
Operate the following procedures to uninstall the printer driver.
1) Start “Terminal” of “Utility” in the “Applications” folder.
2) When you do not have administrator authority, obtain it by “su” command.
3) Go to the directory where the uninstallation script (Rem80.sh) is stored and execute the script.
./Rem80.sh
4) When a password is required, enter the password for the administrator.
5) When uninstallation is completed successfully, the following message is displayed.
Uninstallation was completed.
Is a computer rebooted?” (Y/N):
6) Enter “Y” or “y” to reboot the computer.
If the computer is not rebooted automatically, exit the ongoing applications and reboot the computer
manually.
Function explanation
1. Page Setup dialog
<Fig. 12 Page Setup dialog>
1) Paper Size
The size of paper is selected.
The number of print pixels for each paper size is shown in the table.
Paper size Print dots
10x15 (4x6”)
10x15 (4x6”)
1228x1864
5x15x2 Type1 (2x6”x2)
*1
10x15 (4x6") white border
*2
1086x1676
10x15x2 Type1 (4x6”x2) 1864x2730
13x13 (5x5”) 1524x1568
13x18 (5x7”) 1568x2128
13x18 (5x7”) white border
*2
1380x1986
15x15 (6x6”) 1820x1864
15x20 (6x8”) 1864x2422
15x20 (6x8”) white border
*2
1676x2280
5x15x2 Type2 (2x6”x2)
*1
614x1864
*1: For the print, see “Operating directions for customer’s purpose.”
*2: When the paper size with white border is selected, a white border having a width of about 5 mm is
printed around the image.
The print pixels vary depending on the setting of Paper Size.
2) Orientation
The direction of paper is set.
This is the standard setting function of the operation system.
3) Scale
Enlargement scale is set. (Range : 25-400%)
This is the standard setting function of the operation system.