Specifications

ManualsBrandsMitsubishi Electric ManualsComputer equipmentCP-D80DW

MITSUBISHI Digital Color Printer CP-D80DW series

PRINTER DRIVER GUIDE

(For Macintosh

CP-D80DW series)

Macintosh, Apple, and Mac OS are trademarks of Apple Inc.

Adobe, Adobe Photoshop are registered trademarks of Adobe Systems.

The various software packages mentioned in this manual are the registered trademarks of their

respective companies.

Refer to the following web site to check the latest version of the printer driver.

http://www.MitsubishiElectric.co.jp/vcp/support/driver_en.html

You can not use different version of the driver at the same time.

When the driver has already installed, uninstall it and then install this driver.

System requirements

Computer : PowerMacintosh G4, G5, PowerBookG4, iMac, Mac mini,

MacBook, MacBook Pro, Mac Pro

Main storage memory : 512 Mbytes or more

Hard disk : Empty capacity 512 Mbytes or more

Operating system : 10.5, 10.6, 10.7, 10.8, 10.9

USB

cable : Be sure to use a cable 2m or shorter.

* Use the printer driver in an environment that your operating system works properly.

*1: CP-D80DW series printer supports USB 2.0 (Hi-Speed USB) interface. As USB 2.0 is fully upward-

compatible with USB 1.1, CP-D80DW series printer can be used with a personal computer that

supports USB 1.1 interface.

To use CP-D80DW series printer based on USB 2.0 (Hi-Speed USB), connect with a personal

computer that supports USB 2.0 (Hi-Speed USB). For USB 2.0 (Hi-Speed USB) compatibility of your

personal computer, contact the manufacturer of the personal computer.

*2: This printer driver supports UniversalBinary.

This printer driver is operable either on Intel-based Mac OS X or PowerPC-based Mac OS X.

Summary of content (9 pages)

PAGE 1
PRINTER DRIVER GUIDE (For Macintosh® CP-D80DW series) Macintosh, Apple, and Mac OS are trademarks of Apple Inc. Adobe, Adobe Photoshop are registered trademarks of Adobe Systems. The various software packages mentioned in this manual are the registered trademarks of their respective companies. Refer to the following web site to check the latest version of the printer driver. http://www.MitsubishiElectric.co.jp/vcp/support/driver_en.html You can not use different version of the driver at the same time.
PAGE 2
Installation Administrator authority is required to install this printer driver. When the printer driver of older version has been installed, uninstall it before installing this driver. * Although the screen of the display is an installation screen of Mac OS X 10.6, operating procedures are the same as any other Mac OS X. 1) Start your Macintosh. 2) Double-click on “CP80MacOSX10.5” of the folder. (Fig. 1) 3) Click “Continue” button in the “Install MITSUBISHI CPD80D.” (Fig.
PAGE 3
8) Click “Continue Installation.” (Fig. 7) 9) Click “Restart” to restart the personal computer. (Fig. 8) 10) Turn on the printer and connect it with the personal computer. 11) Click “System Preferences” to display “System Preferences” screen. (Fig. 9) 12) Click “Print & Fax” on “System Preferences screen.” The installed printer is automatically added to the “Printers.” (Fig. 10) (“Print & Fax”: “Print & Scan” in Mac OS X 10.7 or 10.8, and “Printers & Scanners” in Mac OS X 10.
PAGE 4
Uninstallation Operate the following procedures to uninstall the printer driver. 1) Start “Terminal” of “Utility” in the “Applications” folder. 2) When you do not have administrator authority, obtain it by “su” command. 3) Go to the directory where the uninstallation script (Rem80.sh) is stored and execute the script. ./Rem80.sh 4) When a password is required, enter the password for the administrator. 5) When uninstallation is completed successfully, the following message is displayed.
PAGE 5
2. Print dialog The following settings can be configured when “Feature Sets” of “Printer Features” is set to “Options” in the Print dialog. 1) Sharpness none / -3 / -2 / -1 / 0 / 1 / 2 / 3 Level of outline correction is changed. none :Not perform the outline correction. -3 to 3 :The value is smaller, the outline becomes softer. The value is larger, the outline becomes sharper. 2) PrintFinish Printing is finished in matte.
PAGE 6
Use this function to adjust the brightness of the print picture. When you want to make the print picture darker, decrease the value of “Brightness”. (Output data) 255 White Larger Smaller 0 Black Brightness 255(Input data) White 7) Contrast Adjusted value R, G, and B (-64-+64) Use this function to adjust the contrast of the print picture. When you want to make the contrast of the print picture stronger, increase the value of “Contrast”.
PAGE 7
Notes 1) Secure of Hard disk for spool file Secure the capacity of Hard disk for spool file enough for the printer operation and the number of printing sheets. The printing cannot be correctly carried out when the capacity is running short. The drive for spool file is the same drive as the system drive usually. 2) Operation of the printer Refer to the operation manual of the printer. Do not turn off the power switch during data transfer or print.
PAGE 8
13) When the 5x15x2 (2x6”) (Type1 or Type2) is selected for the paper size The paper cut position may shift depending on the printer. 14) When you pause or resume the printing or delete the job in the Print Queue while the printer driver is communicating with the printer such as during the printer error, the communication may fail and the deleted job may be printed.
PAGE 9
Operating directions for customer’s purpose 1. When you want to adjust the color of the print image. Set the following settings in “Feature Sets” of “Printer Features” in the Print dialog. (Note that the effects are invalid on the display even if you make following setting.) 1) When you want the density of entire print picture to be thick (dark), decrease the value of “Brightness”. 2) When the print picture is out of focus (the contrast is weak), increase the value of “Contrast”.