Installation guide

4
Power down procedure
If LOC Technology is in use, a user of appropriate authority
must be logged on before the system can be powered
down.
1. Push the
POWER button and hold it until the system
powers down.
2. Isolate the UPS batteries by setting the Battery
Power switch to the ‘0’ position.
3. Unplug the mains power supply.
Power up procedure
1. Ensure that the Battery Power switch is in the ‘0’
position.
2. Plug in the mains power supply.
4. Set the Battery Power switch to the ‘1’ position.
5. Push the
POWER button.
6. Perform any required power-on security procedure.