Installation guide
22
Expansion options
The following table lists the possible upgrade routes for
each possible combination of drives in each bay:
Drive Current Possible
bay configuration expansion
Rear One 1" high drive One 1/2 height drive
or
One or two 1" inch high drives
Two 1" high drives One 1" inch high drive
One 1/2 height drive One 1/2 height drive
or
One 1" inch high drive
Front No drive One full height drive
or
One or two 1/2 height drives
or
One 1" high drive
or
One 1/2 height and one 1" high
drive
One 1/2 height drive One 1/2 height drive
or
One 1" inch high drive
One 1" high drive One 1/2 height drive
Notes
1. The only full height drive that Apricot supplies is an
autoloading DDS-DC drive.
2. If two drives are fitted in the front drive bay, they can
be either two half height removable media drives, or
one half height removable media drive and one half
height or 1" high hard disk drive. If a hard disk drive
is fitted in the front drive bay it must be in the right of
the two slots.
Contact your Apricot supplier for further information about
drive upgrades.