Installation guide

Supplier upgrades

The add-ons described earlier may be installed by a

confident and competent user. The installation of additional

(or replacement) drives is more complex, and should only

be carried out by competent service personnel.

Installing additional drives

The Apricot FT//e provides a drive cradle that contains two

bays with space for a maximum of five drives. These are:

* Two 1/2 height drives at the front of the system unit.

* Up to three SCSI hard disk drives at the rear of the

system unit.

Notes

1. The first 3.5" floppy drive is not installed in the drive

cradle. It is attached, via a mounting plate, to the

power supply.

2. Drives available for the front bay include: 3.5" SCSI

hard disk drives, 5.25" floppy drive, 5.25" SCSI tape

drives and a 5.25" CD-ROM drive. Any two of these

may be fitted.