User`s guide

Quick Guide to Security
USER’S GUIDE B/1
BB QUICK GUIDE TO SECQUICK GUIDE TO SECURITYURITY
This computer is protected by an internal security system. A user
account has been set up so that you can use the computer, but you
may be restricted to using it only at certain times or on certain days
of the week – these are your logon periods.
The person responsible for the security system is called the Master
user. This may be the owner of the computer, or someone else who
has been given the job of safeguarding its security. If you have any
problems with the security system, ask the Master user for help.
Logging-on to the computer
Every time you turn on or restart the computer (for example, by
pressing
CTRL+ALT+DEL in MS-DOS) you can expect to go through
a logon sequence. This typically involves an infrared device called
a KeyLOC card, a user name and a password.
1. If the Logon dialog box appears, aim your KeyLOC card at the
infrared sensor on the front of the computer and press the
button on the card. If you don’t have a KeyLOC card, press
the
ESC key instead.
2. If the User Logon dialog box appears, type your user name in
the User Name box, press
TAB, then type your password in the
Password box. The password is not displayed as you type
(each character is shown as an asterisk). Choose the OK button
(if you press
ENTER after typing your password, the OK button
is chosen automatically).
You may get both dialog boxes, or only one. It depends on how the
Master user has set up the security system.