User`s guide

Technical Information
A/4 MASTER USER’S GUIDE
3. If necessary, remove any expansion cards that obscure the
Security Card.
4. Move the Clear Security (CLR SEC) jumper on the Security
Card to the “Clear” position (see diagram).
5. Replace the system unit cover and reconnect all power cords.
6. Insert a system diskette in Drive A and turn on the computer.
7. Type the Security Card’s SIN in the Security Failure dialog
box and choose OK.
Security Failure
OK
Enter SIN
The LOC Technology Setup utility starts automatically.
8. Define at least one Master user account, then exit from LOC
Technology Setup (see Chapter 2, “Configuring the Security
System”, for detailed instructions).
9. Turn off the computer, unplug all power cords and remove the
system unit cover.
10. Return the Clear Security jumper on the Security Card to the
“Normal” position.
11. Replace any expansion cards you removed earlier.
12. Replace the system unit cover and reconnect all power cords.