User`s guide

Configuring the Security System
2/8 MASTER USER’S GUIDE
To set the user information:
1. Type the user name in the User Name text box. You must use a
different name for each user account.
If you do not supply a user name, the security system puts
USER (followed by a user number) in the User Name box. This
shows that the account is in use, but it is not the account’s user
name.
2. Type the password in the Password text box and press
ENTER.
Then re-type the password to confirm it.
To preserve security, the password appears as a string of
asterisks. Remember that there may be a minimum password
length.
User names and passwords can each have up to 8 characters,
selected from A-Z, a-z, 0-9 and
SPACE.
3. If this is a Master user account, select the Master Status check
box.
When you select Master Status, some of the other controls in
the User Setup dialog are disabled (they become dimmed or
“greyed-out”). These changes are made to ensure that a Master
user will always be able to logon and access the LOC
Technology Setup utility.
The Master Status check box is greyed-out for accounts with
shared KeyLOC cards.
4. To set a date when the user account will expire, select the User
Account check box in the Expiry section and then type the
date next to it.
You cannot set an expiry date for a Master user account.
5. To set a date when the password will expire, select the
Password check box in the Expiry section. You do not need to
type the date itself as it is automatically set to today’s date plus
the maximum password lifetime.