User`s guide

Configuring the Security System
2/2 MASTER USER’S GUIDE
Using the LOC Technology Setup utility
To configure the security system:
1. Turn on or reboot the computer.
2. If the security system is already enabled, logon to the computer
using an account that includes the right to access LOC
Technology Setup.
3. Press the
ALT+S key combination when invited to do so.
4. In the LOC Technology Setup dialog, set up the global
options you want. See the later section on “Setting up a
security configuration” for details.
5. To define user accounts, choose the Set Users button.
6. In the User Setup dialog, choose the Next User button to cycle
through the accounts to find a free account, or the account you
want to edit. Free accounts are marked as
FREE in the User
Name text box.
7. Set up the account details you want. See the section on
“Defining user accounts” for details. Choose the Next User
button to find the next account you want to edit. When you
have finished, choose the OK button.
8. In the LOC Technology Setup dialog, choose the Change
Status button to set the Security Status to “Enabled” or
“Disabled”, as required.
The security system has no effect until it is enabled.
9. Choose the Save button to save the new security configuration
in memory.
If you have saved changes in the utility, the computer reboots
automatically.