User`s guide

BIOS setup and menus
FT1200 HANDBOOK 6/11
Power Menu
Feature Options Description
Power Management Disabled
Enabled (default)
Enables or disables the BIOS power management
feature.
Inactivity Timer Off (default)
1 Minute
2 Minutes
4 Minutes
6 Minutes
8 Minutes
12 Minutes
16 Minutes
Specifies the amount of time before the computer
enters standby mode.
Hard Drive Disabled
Enabled (default)
Enables power management for hard disks during
standby and suspend modes.
VESA Video Power Down Disabled
Enabled (default)
Enables power management for video during standby
and suspend modes.
Boot Menu
Feature Options Description
QuickBoot Mode Enabled (default)
Disabled
Enables the computer to boot without running
certain POST tests.
Restore on AC/Power
Loss
Stay Off
Last State (default)
Power On
Specifies how the computer responds following a
power failure.
Stay Off; power off until power button pressed.
Last State; power state before a power failure.
Power On; power without restoring previous
power state.
On Modem Ring Stay Off
Power On (default)
How the computer responds to an incoming call
on an installed modem when the power is off.
On LAN Stay Off
Power On (default)
How the computer responds to a LAN wakeup
event when the power is off.
On PME Stay Off
Power On (default)
How the computer responds to a PCI power
management enable event when the power is off.
Scan User Flash Area Enabled
Disabled (default)
Enables the BIOS to scan the flash memory for
user binary files that are executed at boot time.