User`s guide

BIOS setup and menus
6/10 FT1200 HANDBOOK
Video Configuration Submenu
Feature Options Description
Palette Snooping Disabled (default)
Enabled
Controls the ability of a primary PCI graphics
controller to share a common palette with an ISA
add-in video card.
DMI Event Logging Submenu
Feature Options Description
Event log capacity No options Indicates if there is space available in the event log.
Event log validity No options Indicates if the contents of the event log are valid.
View DMI event
log
No options Enables viewing of DMI event log.
Clear all DMI
event logs
No (default)
Yes
Clears the DMI Event Log after rebooting.
Event Logging Disabled
Enabled (default)
Enables logging of DMI events.
ECC Event
Logging
Disabled (default)
Enabled
Enables logging of ECC events.
Prompt on POST
errors
Disabled
Enabled (default)
If enabled, the BIOS prompts for input, if an error
occurs during power up.
Mark DMI events
as read
No options Marks all DMI events as read.
Security Menu
Feature Options Description
User Password Is No options Reports if there is a user password set.
Supervisor Password Is No options Reports if there is a supervisor password set.
Set User Password Password can be up to seven
alphanumeric characters.
Specifies the user password.
Set Supervisor Password Password can be up to seven
alphanumeric characters.
Specifies the supervisor password.
Clear User Password No options Pressing <Enter> clears the user password.
User Setup Access Disabled
Enabled (default)
Enables or disables user access to the Setup
program.
Unattended Start Disabled (default)
Enabled
Enables the unattended start feature. When
enabled, the computer boots, but the keyboard
is locked. The user must enter a password to
unlock the computer or boot from a floppy
diskette.