User`s guide

BIOS setup and menus
FT1200 HANDBOOK 6/9
Feature Options Description
Mode Output Only
Bi-directional
(default)
EPP
ECP
Selects the mode for the parallel port.
Output Only operates in AT-compatible mode.
Bi-directional operates in bi-directional PS/2-compatible mode.
EPP is Extended Parallel Port mode, a high-speed bi-directional
mode.
ECP is Enhanced Capabilities Port mode, a high-speed bi-
directional mode.
Floppy disk
controller
Disabled
Enabled (default)
Enables or disables the floppy disk controller.
IDE controller Disabled
Primary
Secondary
Both (default)
Configures the IDE controller.
Both specifies both the primary and secondary channel are used.
Audio Disabled
Enabled (default)
Enables or disables the onboard audio subsystem.
Hardware
monitor
Disabled
Enabled (default)
Enables or disables the onboard hardware monitor.
SCSI controller Disabled
Enabled (default)
Enables or disables the onboard SCSI controller.
Keyboard Configuration Submenu
Feature Options Description
Numlock Auto (default)
On
Off
Specifies the power on state of the Num Lock feature on
the numeric keypad of the keyboard.
Key Click Disabled (default)
Enabled
Enables the key click option.
Keyboard auto-
repeat rate
30/sec (default)
26.7/sec
21.8/sec
18.5/sec
13.3/sec
10/sec
6/sec
2/sec
Selects the key repeat rate.
Keyboard auto-
repeat delay
¼ sec
½ sec (default)
¾ sec
1 sec
Selects the delay before key repeat.