User`s guide

BIOS setup and menus
6/8 FT1200 HANDBOOK
Resource Configuration Submenu
Feature Options Description
Memory
Reservation
C800 - CBFF Available (default) | Reserved
CC00- CFFF Available (default) | Reserved
D000 - D3FF Available (default) | Reserved
D400 - D7FF Available (default) | Reserved
D800 - DBFF Available (default) | Reserved
DC00 - DFFF Available (default) | Reserved
Memory hole Disabled (default) | Conventional | Extended
Reserves specific upper
memory blocks for use
by legacy ISA devices.
Memory hole frees
address space in RAM
for legacy ISA boards.
IRQ
Reservation
IRQ3 Available (default) | Reserved
IRQ4 Available (default) | Reserved
IRQ5 Available (default) | Reserved
IRQ7 Available (default) | Reserved
IRQ10 Available (default) | Reserved
IRQ11 Available (default) | Reserved
Reserves specific IRQs
for use by legacy ISA
devices.
An * (asterisk) displayed
next to an IRQ indicates
an IRQ conflict.
Peripheral Configuration Submenu
Feature Options Description
Serial port A Disabled
Enabled
Auto (default)
Configures serial port A.
Auto assigns the first free COM port, normally COM1, the
address 3F8h and the interrupt IRQ4.
An * (asterisk) displayed next to an address indicates a conflict
with another device.
Serial port B Disabled
Enabled
Auto (default)
Configures serial port B.
Auto assigns the first free COM port, normally COM2, the
address 2F8h and the interrupt IRQ3.
An * (asterisk) displayed next to an address indicates a conflict
with another device.
If either serial port address is set, that address will not appear in
the list of options for the other serial port.
Parallel port Disabled
Enabled
Auto (default)
Configures the parallel port.
Auto assigns LPT1 the address 378h and the interrupt IRQ7.
An * (asterisk) displayed next to an address indicates a conflict
with another device.