User`s guide

BIOS setup and menus
6/4 FT1200 HANDBOOK
Jumper Settings for Setup Program Modes
Mode Jumper Description
Normal 1-2 BIOS uses current configuration and passwords for booting.
Configure 2-3 After the POST runs, Setup starts and displays the Maintenance menu.
There are options for setting the processor speed and clearing passwords.
Recovery None BIOS recovers data from a recovery diskette. Refer to Chapter 5 for
information on recovering the BIOS data during an upgrade.
Setup Menus
To enter the Setup program, turn the computer on and press <F2>
when you see the message:
Press <F2> Key if you want to run SETUP
Setup Menu Bar
Setup Menu Screen Use this menu to:
Maintenance Specify the processor speed and clear the Setup passwords.
This menu is only available in configure mode.
Main Allocate resources for hardware components.
Advanced Specify advanced features available through the chipset.
Security Specify passwords and security features.
Power Specify power management features.
Boot Specify boot options and power supply controls.
Exit Save or discard changes to the Setup program options.
Setup Function Keys
Setup Key Description
<F1> or <Alt-H> Brings up a help screen for the current item.
<Esc> Exits the menu.
< ← > or <→> Selects a different menu screen.
< ↑ > or <↓> Moves cursor up or down.
<Home> or <End> Moves cursor to top or bottom of the window.
<PgUp> or <PgDn> Moves cursor to top or bottom of the window.
<F5> or <-> Selects the previous value for a field.
<F6> or <+> or <Space> Selects the next value for a field.
<F9> Loads the default configuration values for the current menu.
<F10> Saves the current values and exits Setup.
<Enter> Executes command or selects the submenu.
<+> or <-> Moves a device or class of devices up or down in the boot order.